Wednesday Links: MarshmallowMatic, Etch ...

Solar botics
April 2, 2014

So there's one link today that makes my artistic soul happy - it is the laser-controlled Etch A Sketch. Although I never owned an Etch A Sketch (some smarty pants might say right here that in Russia we used rusty nails to draw on cardboard instead), but the idea to draw with a laser beam seems extremely attractive.

Smiley Face Screws by Yuma Kano
This needs to be a standard, eventually expanding the range of screws to :< (sad)ಠ_ಠ (sad in Kannada) and ~(_8^(I) (Homer Simpson). (Via Colossal)
MarshMallowMatic
Smiley faces toasted on marshmallows - there's potential , except for I don't know exactly how much toasting is involved in this one... (By Evil Mad Scientist Laboratories, via Gizmodo)
An Etch A Sketch Laser Cutter Makes Your Crappy Drawings Permanent
Folks at Just Add Sharks hacked Etch a Sketch to control a laser. (Via Gizmodo)
Japan gets serious about 3D printing using titanium
Would be nice to see 3D printers work period, and then work using titanium. Maybe Japan will make it happen... (Via Geek.com)
Bionic Kangaroo
Compared to the kangaroo produced by nature this little fella looks a bit wobbly, but still pretty impressive. (By Festo, via IEEE Spectrum)

So does the marshmallowBot: devouring your artwork and getting it destroyed with stomach acid - you cant get more conceptual than that!

MORE POSTS

July 31, 2013
Wednesday Cool Links: Theremin Goggles, ...

Shooting analog pictures, shooting bullets underwater, shooting… theremin noises from goggles, shooting… human-powered helicopters! if that doesn’t make any sense, see the links below: Steampunk theremin goggles A wicked build by [Sarah] - theremin steampunk goggles. Photo sensor  will feel the amount of light and the slider would adjust the pitch of the sound produced. Check […]

April 11, 2014
Friday New Product: LilyTwinkle, Teensy ...

It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is. 4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and […]

June 11, 2004
New! Servo2 and RM1a motors

We've got in an inventory of Grand Wing Servo S03N standard servos. These pack quite a bit of power, and prove to be pretty good for standard servo applications. We're sorry to say that the RM1 is no-more. The RM1 is dead; long live the RM1. (I never understood that phrase...) All hail the RM1a! […]

February 10, 2017
Web Links Friday

A Batman Jacket Made With 10,000 Lego Bricks Lego and Batman rolled in one? Geek factor level 80. (Via Fashionablygeek.com) Japanese Scientists Artificially Pollinate Flowers with a Bee drone Lookit this electric thing smacking the poor lily up the face! Bees are much more gentle. Save the bees. Technology is cool, but bees are better. […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart