We thought what better to do then build a robot? So we have picked three of our kits that you can build with Dad (or a Son/Daughter). And, not only can you assemble these kits in an afternoon, they will look great showing them off at work on Monday! Never built a robot before? No […]
Vancouver Mini Maker Faire
Dave Hrynkiw
June 13, 2011
The best part of being a company in Canada is that you don't need to leave the country to go there. That being said, we're going to show some of our fellow Canuck's some lovin' by attending the Vancouver Mini Maker Faire at the Great Northern Way Campus from June 25th-26th. We'll bring a handful of our more popular kits and acessories with us, along with some stuff that we distribute for SparkFun, Adafruit, and a few others. But wait, THERE'S MORE! We'll also be recreating the magical experience of a 100% free ARDX workshop. Drop by our booth, and we'll set you up with a couple Arduino-based experiments to try and give you any help you might need along the way. We'll even throw in a lil' treat for participating. This is a great chance for west coasters that didn't make it down to San Franscisco last month to experience Maker Faire. Be sure to drop by and say hello if you're in the area!
MORE POSTS
More about website development
A decent website is a core of a web-centric store like ours. Back in the early days, I hand-coded HTML (yeah, go back to waybackmachine to admire that work), and what you got is what you got. Since then, we rebuilt Solarbotics.com through 3 more iterations of totally refactored hand-coded platforms, and then 2 aborted […]
New Product: Synapse & ESP
Synapse 220 Modules RF220SU SNAP Engine, 2 Mbps 2.4 GHz CAD40.43/USD29.95 WiFi is good, but the SNAP Engine Model RF220SU is an IEEE 802.15.4, low-power, very robust solution for embedded wireless control and monitoring networks. With auto-mesh networking (try that WiFi...). 2Mbps on the 2.4GHz spectrum and RP-SMA or U.FL selectable antenna. Synapse RF220UF1 CAD40.43/USD29.95 […]
SCC3733 Solarcell hacking
Here's a tip submitted by Rick Steenblik regarding hacking our SCC3733 for less voltage, but more current: After using your SCC3733 solar cells for a couple of bots I noticed that they can be altered to provide about 3.3v at 80ma (in full sun) by cutting the bus connector on the back to electrically separate […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.