SparkFun Thing Plus - SAMD51 SKU: 701452
SparkFun Thing Plus – SAMD51
$25.29 USD
Is it power you seek? With a 32-bit ARM Cortex-M4F MCU, the SparkFun SAMD51 Thing Plus is one of Sparkfun’s most powerful microcontroller boards yet!
In stock
Description
The SAMD51 Thing Plus provides you with an economical and easy-to-use development platform if you’re needing more power with minimal working space. This Thing even comes flashed with the same convenient UF2 bootloader as the RedBoard Turbo. To make the Thing Plus even easier to use, we’ve moved a few pins around to make the board Feather compatible and it utilizes our handy Qwiic Connect System which means no soldering or shields are required to connect it to the rest of your system!
The ATSAMD51J20 utilizes a 32-bit ARM Cortex-M4 processor with Floating Point Unit (FPU), running up to 120MHz, up to 1MB of flash memory, up to 256KB of SRAM with ECC, up to 6 SERCOM interfaces, and other features. In addition to the USB interface and Qwiic connection, The SAMD51 Thing Plus provides a 600mA 3.3V regulator and LiPo charger.
Features
- ATSAMD51J20 microcontroller
- 32-bit ARM Cortex-M4F MCU
- Up to 120MHz CPU speed
- 1MB flash memory
- 256KB SRAM
- Up to 6 SERCOM interfaces
- UF2 bootloader
- Qwiic connector
- USB interface for programming and power
- 600mA 3.3V regulator
- 4Mb (external) flash memory
- LiPo charger
- Feather pin layout
Documentation
More Info
Weight | 0.0015 kg |
---|---|
Dimensions | 6 × 2.5 × 0.75 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
50-Series Push Pogo Probe Holder
SKU: PPH-50This little devices allow you to simply and easily install and replace existing 50-series pogo pins$1.50 USDIn stock
Add to cart -
Push Pogo Pin 6 – 6 Point
SKU: PP6This 33mm (1.3") long 6-groove tipped pogo pin probe is normally used for electronic JTAG uses, but we used them for bots!$1.25 USDIn stock
Add to cart -
Magnet
SKU: Mag1These 3/4" Neodymium magnets are very strong. Useful for all kinds of Magbot experiments or just holding posters up on metal surfaces as we like to do!$2.75 USDOut of stock
Read more -
Microchip PIC16F877A
SKU: PIC16F877AThis is the Microchip PIC16F877A microcontroller that is used in our K SV-PIC Brainboard add-on.$7.95 USDIn stock
Add to cart -
Push Pogo Probe Holder
SKU: pph2Pogo-Pin probe holders for 1.01mm diameter pins$1.25 USDIn stock
Add to cart
Reviews
There are no reviews yet.