Solarbotics Repairacord™ Bracelet - Hybrid SKU: 60370
Home » Solarbotics Repairacord™ Bracelet – Hybrid
Solarbotics Repairacord™ Bracelet – Hybrid
$17.41 USD
It’s a Survival Bracelet… for geeks. Hybrid has both cord and wire woven together.
Options
Description
Everyone is familiar with paracord bracelets – the cleverly woven wearable survival device that instantly unravels into many meters of useful and super strong nylon cord in case of necessity. These are useful for outdoorsy types, but what if you are an indoorsy type with a lot of electronic emergencies? Or a geek in need of a bright wrist decoration that shows off your geekness?
The Solarbotics Repairacord™ Electronics Survival Bracelet is what you need (complimentary pun included). Woven using traditional quick-release paracord weaves, it unravels in seconds, but instead of a regular electronically-inept nylon cord, it packs about 1.2m (4′) of a high-quality 24-gauge 40-strand silicon wire. It’s wonderfully flexible and surprisingly wearable against the skin.
But should we say (infomercial style) wait – there’s more! What good is wire if you can’t utilize it properly? For ultimate electronics confidence, you’ll find inside of each bracelet’s core a payload sleeve containing a 15cm (6″) length each of 3mm heat shrink and solder.
Now the only thing that you need is something to solder with. Out in the urban (or not so urban) jungle it could be a coin or a bare nail, which we have successfully tried. There’s other hacks showing how to solder with a regular butane lighter.
So with Repairacord you are ready to repair the world – if you need to.
Features:
- Choice of 17.8 and 20.3cm lengths (7″and 8″ respectively)
- 2 quick release designs: sinnet and snake weaves
Each bracelet features:
- 1.2M (~4’) of 24AWG, 40-strand tinned wire in a superflexible silicone insulator
- Up to 1.4M (~4.5’) of 550 LB Type III paracord (depending on the style/weave)
- 16cm (~6”) of 1/8″ heat shrink and lead-free solder in hollow paracord payload sheathe.
Wearability:
The “Hybrid” version blends the two different diameters of media together in a very visually appealing combination. It sits on your wrist with more visual presence than the “All-wire” version, taking advantage of the additional colors paracord offers. It also protects the exposed silicone wire much better, as the full type-III paracord makes up most of the exposed area.
- Advantages: Over 1M of true 550lb paracord available in addition to 2M of wire. Is visually the most pleasing.
- Disadvantages: Bulkier than “All-wire” model.
Also check out the other 2 variations:
More Info
Weight | 0.1 kg |
---|---|
Dimensions | 15 × 15 × 2 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
PICAXE-28X1 SMD
SKU: 28482$8.95 USDThe PICAXE-28X1 is powerful, but how about being powerful AND tiny? Here's the surface-mount version!
In stock
Add to cart -
Push Pogo Pin 6 – 6 Point
SKU: PP6This 33mm (1.3") long 6-groove tipped pogo pin probe is normally used for electronic JTAG uses, but we used them for bots!$1.25 USDIn stock
Add to cart -
50-Series Push Pogo Probe Holder
SKU: PPH-50This little devices allow you to simply and easily install and replace existing 50-series pogo pins$1.50 USDIn stock
Add to cart -
2mm White Sintra
SKU: SIN2mm-WThis 2mm thick 8x12" expanded PVC sheet has excellent robot-building characteristics.$2.85 USDIn stock
Add to cart -
Push Pogo Probe Holder
SKU: pph2Pogo-Pin probe holders for 1.01mm diameter pins$1.25 USDIn stock
Add to cart
Reviews
There are no reviews yet.