Seeed Raspberry Pi Breakout Board v1.0 $14.95 The Raspberry Pi Breakout Board for Raspberry Pi is a prototype board that allows you to combine your Raspberry Pi with other components and modules. Grove - Light Sensor(P) $3.75 Panel mount light sensor from SeeedStudio. XBee WiFi Module - Wire Antenna $52.75 This is the XBee WiFi […]
New Products: All-Seeing Eye, LCDs
Dave Hrynkiw
July 20, 2012
A while ago we showed off the prototype/demo for the All-Seeing Eye, and from the positive response it got we decided to bring it back as An Actual Thing. We even mounted it to a DragonTail, and let it go for a spin around the office. Check it out:
|
All-Seeing Eye Sensor Mount Kit - Standard Range $66.92 The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port. |
 |
All-Seeing Eye Sensor Mount Kit - Long Range $77.80 The All-seeing Eye is a custom acrylic enclosure used to mount 4 Infrared distance sensors that can detect obstacles in a close to 360 degree radius. These sensors are easily chained together and all communicate on a single, shared I2C port. |
 |
Serial Enabled 16x2 LCD - White on Black 5V $24.95 This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more! |
 |
Serial Enabled 16x2 LCD - Yellow on Blue 5V $24.95 This is Sparkfun's latest evolution of serial LCD. On-board is a 16x2 character LCD with an embedded circuit based around the PIC16F88. Via a TTL-serial interface you can issue commands to display characters, clear the screen, adjust the backlight brightness, turn the display on/off, and more! |
Two sensor modules, two LCDs. I'm sure there's some kind of joke in there waiting to be made, but I can't quite figure it out. So instead, I'm going to go and pour some maple syrup onto my bifocals.
...Hrm. You know that it's the end of a long week when something seems funny inside your head and nowhere else.
MORE POSTS
Introducting the CMDR Shield for Arduino
Last week we beefed up the Ardweeny with the Multipack, and this week we're turning out attention to the Arduino. We've just released the CMDR (Compact Motor Driver) Shield, which lets you bi-directionally drive two gear motors or a single stepper motor, read 6 analog sensors, and control up to 8 servos all at the […]
Lulzbot 3D Printer Documentation and Res...
Lulzbot Mini 2 Documentation Lulzbot Mini 2 Quick Start Guide Lulzbot Mini 2 Quick Start Video How to use the LCD Interface Video How to Replace a Damaged/Bubbled PEI Sheet Video How to update your firmware Video How to use Cura: Lulzbot Edition Software Video (slightly outdated but relevant) Lulzbot Mini 2 Detailed Calibration and […]
Freezer Burn 2017 Pendant
Freezer Burn is an Alberta Regional Burning Man celebration annually creating a temporary community out on the prairie. A few of us here at Solarbotics attend, and having access to all of the neat technology, we make an effort to bring special projects to the festival. Lit up projects work well since the event is […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.