This is a quick note to announce our holiday schedule, which is going to be as follows: December 24 (Christmas Eve)- 9am to 12pm (half day) December 25 (Christmas Day) - offices are closed December 26 (Boxing Day) - offices are closed December 31 (The Day Before New Year's Day) - 9am to 12pm (half […]
More Grove Parts from SeeedStudio
Solar botics
February 12, 2015
SeeedStudio Grove modules, including a flame sensor, skin conductivity and touch sensors, IR send/receive units, and an ultrasonic sensor. We continue to add to the Grove items category!
|
Grove - Flame Sensor $8.28 An adjustable-sensitivity flame sensor, with Grove interface compatibility. |
 |
Grove - GSR Interface $11.88 Galvanic skin response measures the electrical conductance of skin. This Grove module makes it easy to measure the response across 2 fingers on a hand. |
 |
Grove - Infrared Receiver $5.04 Any project that requires talking to a standard 38kHz IR remote control will work well with this receiver. |
 |
Grove - Infrared Emitter $5.04 Convenient plug-in-and-use Infrared emitter module for the Grove system. |
 |
Grove - Ultrasonic Ranger $19.32 Ultrasonic distance sensor, featuring the plug-in-and-use Grove system. |
 |
Grove - Touch Sensor $5.04 It's a ready-to-use touch sensor switch compatible with the Grove system. Plug it in, tuck it in behind a non-metallic surface, and you are finished. |
MORE POSTS
Sumovore Upgrade Kit
What's new at Solarbotics? We've just released our Sumovore Baseplate Upgrade Kit which will let you replace the mounting tape & zip-tie restraints with a black powder-coated steel baseplate! This upgrade makes the Sumovore much more robust, and also increases the mass for a more competitive edge. Note that all new Sumovores from Solarbotics will […]
Friday New Product: Kossel Accessories
Brainwave Pro 3-Axis CNC controller For Kossel $185.83 The Kossel Pro uses the Z-Designs Brainwave Pro controller, which is the product of a close collaboration between Terence Tam and Mike Ziomkowski, based upon Matthew Wilson's original Brainwave low cost 3D Printer controller. Kossel Ball Joint Set Kit $78.00 These are not repurposed RC Car ball […]
New GM11-14 mounting screws
BOY those are strange little screws on the face of the GM11-14 series of gear motors! 1.7mm diameter x 0.35mm thread pitch ain't a common bolt, but we found some 4mm long that we've made available for those of you looking for a precision method of mounting the motors. Check out part M1.7x0.35!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.