Wednesday links are back, with more wednesdayness and linkness. Or linkedness. In any case, after the holidays we got better. More rested, more well-fed, more exercised, more healthy, more balanced, more busy, more relaxed, more organized, more happy... Er, I think these were New Year resolutions... All I mean is that we are finally back […]
Friday New Product: Ribbon Cable, RGB LE...
Solar botics
November 8, 2013
We got some sticks for sale today. Some are bendable sticks. You can use them as a belt and if you are near the hydroelectrostation dam you can put the power wire into water and that will pick up some leftover electricity and you get a glowing belt. Now other things are measuring devices. You can measure things in non-traditional units.
|
3-pin Ribbon cable connector (WS2812 compatible) $1.25 Secure, locking, high-current 3-conductor connectors ideal for the New Stripxel WS2812b. |
 |
5V RGB LED Stripxels WS2812B (30 per meter) $17.00 There's a new style of RGB Strip LED now, with an embedded controller chip in each LED - the WS2812B! |
 |
5V RGB LED Stripxels WS2812B (72 per meter) $30.00 There's a new style of high density RGB Strip LED now, with an embedded controller chip in each LED - the WS2812B! |
 |
Modified Openbeam Sale - 74.9cm long, 3/16" holes $7.00 What do you do with returned modified Openbeam? Find it a good home! |
My height is is 2.30975 OpenBeam extrusions. Or many 3-pin ribbon cable connectors.
MORE POSTS
Friday New Product: LilyTwinkle, Teensy ...
It's Friday again, and it's been a busy (two) weeks since there was a new product. Wait no more, here it is. 4-Conductor LED Strip Clamp $0.95 Reduce the crazy soldering mess with these super useful RGB LED strip clamps! LilyTwinkle ATtiny85 $6.95 A preprogrammed controller board that can make your wearable project sparkle and […]
Make:KW, New Catalogue
Well folks, it's that magical time where we give you some special insight into what's new n' happenin' in the world of Solarbotics. We'll start off by sending our congrats to everyone who participated in the recent Make:KW Arduino 201 meetup. We were proud to sponsor the event by donating some L298 Compact Motor Driver […]
Solarbotics Raspberry Pi 3 SAFE Assembly...
The instructions for assembling the Pi v3 and the previous acrylic Pi SAFE are quite similar. The only difference between the models is the location of the LED light pipes, so these Pi3 instructions apply generally to all Pi SAFE versions. 1. Your Parts! 8 x 4-40 nuts 8 x 4-40 x 3/8" bolts 2 […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.