Adafruit Trinket-Powered Neopixel Goggle Kit $52.00 This kit is a bit goofy and geeky, but a whole lot of fun to wear - Glowy goggles! Addressable RGB Dress Bundle $104.11 Having been involved with more than a handful of technology dresses and costumes on various occasions we've learned a lot in the process, and wanted […]
Friday New Product: PCBGrip
Solar botics
August 28, 2015
|
PCBGrip Cylinder Accessory (4 pack) $7.20 This accessory is great for adding standoffs and rotating elements to your PCBGrip (or Openbeam!). |
 |
PCBGrip Tri Nut Accessory (pairs) $5.52 Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem. |
 |
T-Bolt Accessory (pairs) $4.80 Solves the problem of needing one more threaded stud in Openbeam, when you've already capped the ends. A BIG time-saver that gets you out of a crunch! |
 |
PCBGrip M3x0.5 Thumb Screw, 14mm dia. Head (4 pack) $6.30 These are nicely machined M3, 14mm diameter thumbscrew from PCBGrip. |
 |
PCBGRip M3 x 0.5 x 7mm Thumb Screw, 7mm dia. Head (25 pack) $15.90 Not just a simple 3mm bolt - this is a beautiful thumbscrew by PCBGrip. |
 |
PCBGrip M3x0.5 Knurled Nut (25 pack) $11.82 Sometimes, it is the screw needing tightening, sometimes you need to adjust the nut. In which case, use this knurled M3. |
MORE POSTS
Zendulums for Japan - results!
We've wrapped up our "Zendulums for Japan" support drive, and we're happy to announce we've sold 84 kits for a total of $2,396.07. A donation of $2400 is being processed to Red Cross Japan. Thanks to all for assisting in our little effort to give some help!
No, it isn't $30...
Sorry about that. The last ad for the ARDX Experimenter's Kit for Arduino? Wrong. Our graphics designer, Chris (yes, I'll give credit where credit is due) used an old template for our latest Servo Advertisement, and didn't change the price. No, it's not $30 - it's still $84.95USD. And continuing the blame-game, I gave him […]
Circuit: Herbie by Randy Sargent
Although not a true BEAM robot, this simple schematic by Randy Sargent is small, simple, slick, and effective. My own version uses a pair of pager motors and three cells from a 9V rechargeable battery. Hard to get any simpler than this device!
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.