This circuit is used to create a simple "edgebot" sumo robot. Being an edgebot refers that it will repeat the same backup/turn/go forward action when it's single edge sensor detects the edge of the ring. This version of the circuit is quite simple, and always turns the same way.
Sundancer review
Dave Hrynkiw
March 28, 2002
Canada Computes has just run a web-review of our Sunancer Butterfly kit.
MORE POSTS
New Product Monday
AxiDraw V3 669CAD / 525USD AxiDraw is a high performance personal writing and drawing machine. MinIMU-9 V5 - IMU Digital Combo Board - 9 Degrees of Freedom 21.55CAD / 16.91USD This is a breakout combo for the LSM6DS33 3-axis gyro/3-axis accelerometer and an LIS3MDL 3-axis magnetometer. With this board, you get a full 9 degrees […]
Strange set of Atmel '328 ICs...
Unlike Sparkfun, who actually manage to find fake Atmel ICs, we just get strange batches. The Atmel ATMega328 is the power behind the Arduino/Freeduino/*duino, and we have to set up a programming system to burn the venerable Arduino Bootloader into these chips. We normally use an AVR STK500 in HVSP (high voltage serial programming) mode, […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.