Project: Experiments in Watermelon Filam...

Dilan Tuff-Overes
March 21, 2018

It takes a while to get to know all the quirks of your 3D printer and filament well. We thought we'd add to the knowledge base and share what we've learned about using the eSun 1.75mm PLA filament in Glass Watermelon Red on our Kossel Pro delta style 3D printer.

After much experimentation we've come to the conclusion that eSun PLA Glass filament is a challenging material when printing conventional 3D objects. Frequent retraction during print moves or when changing layers seems to cause this material to jam inside the print head which can lead to plastic starvation. The result can leave your print looking washed out with voids in the 3D object where no material was successfully extruded.

Where this filament shines is when printing in single walled vase mode! We managed to get some stunning prints (shown below) that highlight what this filament can look like when you give it a constant and continuous extruding profile. We used Simplify3D to slice and create our GCode, but Slic3r is also a good choice due to continuously raising the Z height as it prints in vase mode. This gives you the best results as no weird retraction/move glitches appear in your printed model.

 

In the pictures above and below we can see just how nice the glass filament looks. The odd striations and glitches in our print are primarily due to an issue we have with the linear rails that the print head slides on. These issues may not occur on your own prints.

The vase below was created with the single layer vase mode enabled, but the model produces each fin with a stroke out to the edge of the fin and then a stroke back to the center. This gives the print a deeper pink color which we found quite nice.

The rocket ship below was also printed in single layer vase mode, but our printer botched the print a bit with significant vibration issues.

Like stated in the beginning, our printer is a delta style printer that uses a bowden tube to feed the PLA into the print head. This issue may not occur as much or at all on any printer that feeds the material directly into the print head. Regardless, the next time you are thinking of picking up a roll of our eSun PLA glass filament keep in mind what type of printing you want to do!

If you've successfully printed with our glass PLA and would like to prove us wrong feel free to send a photo of your print to sales@solarbotics.com and we will feature it in a future blog post. Don't miss the opportunity to make us eat our words!

 

 

 

MORE POSTS

December 30, 2009
New Years, New PumLantern Art

Well, we've taken a few days off to enjoy some turkey and presents, and we've come back to the office to keep chugging away... But it's time for another break! New Year's is within spitting distance, and we'll be closed for New Years Day (that, of course, would be Friday, January 1st). As always, we'll […]

January 28, 2013
Early Monday New Product Post: Now with ...

We apologize for the late Friday Product Post - Friday night our brains were temporarily eaten out by rabid flying honey badger monkeys. The brains are now successfully returned into place, and here's the freshly renamed Early Monday Product Post. Oh, look, text! It has letters! And words. And sentences. And clauses. And everything a […]

April 9, 2009
Closed for Easter Weekend, Special Deal

We're coming up on that magical time of year when rabbits tend to poop chocolate eggs. Which, quite frankly, makes absolutely no sense whatsoever. Couple that with April 1st, where the object is to mess with people, and this sure makes for a bizarre month. But hey - when a strange, chocolaty rodent is enough […]

December 1, 2017
Christmas/New Years Holiday Hours

This is a quick note to announce our holiday schedule, which is going to be as follows. At Solarbotics: Friday, December 22 - Offices open til 4pm Monday, December 25 - Tuesday, December 26 -- Closed Wednesday, December 27 & Thursday, December 28 - Offices open 9am to 5pm Friday, December 29 - Offices open til 4pm Monday, January 1 - […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart