Cart 
Rosin Core Solder 60/40 - 1.0mm, 454g Roll SKU: 181963
Rosin Core Solder 60/40 – 1.0mm, 454g Roll
$50.29 USD
The 4890–4898 Sn60/Pb40 RA Solder Wire is an electronic grade solder wire. It uses a classical tin-to-lead alloy ratio, which is complemented with a RA-like flux core.
In stock
Description
The 4890–4898 Sn60/Pb40 RA Solder Wire is an electronic grade solder wire. It uses a classical tin-to-lead alloy ratio, which is complemented with a RA-like flux core.
The solder wires meet J-STD-004B, ASTM B 32, and exceeds J-STD-006C specifications. It melts at a slightly higher temperature and over a wider range than the 63/37 solder. It results in robust and reliable joints that are highly resistant to whisker formation.
The 489x leaded solders achieve a consistent solder and flux percentage through a state-of-the-art, extrusion, wire-drawing machine. This machine continually monitors the wire to prevent voids and ensure consistency, providing a top-grade solder wire
- Alloy exceeds J-STD-006C and meets ASTM B 32 purity requirements
- Flux meets J-STD-004B
- Rosin-activated flux
- Fast-wetting
- Fast-flowing
- Non-corrosive residue
- Non-conductive residue
More Info
| Weight | 0.335 kg |
|---|---|
| Dimensions | 5.90 × 5.90 × 6 cm |
| Type | |
| Chemistry | |
| Diameter | |
| Quantity | |
| Packaging |
Only logged in customers who have purchased this product may leave a review.
Related products
-
3.7V 110mAh LiPoly battery for E-Textiles
What makes this battery special for E-textiles? Built-in current limiting for safety.Retired.Out of stock
Read more -
9V Snap to 2.1mm Barrel Plug Cable
Need a battery for your Arduino that is high enough to regulate the voltage to down to a solid 5V? Well here comes the 9V Snap to 2.1mm Barrel Plug Cable to your rescue! It allows you to plug in 9V and 7.2V rechargeable batteries to anything with a 2.1mm Barrel jack on it.$2.95 USDIn stock
Add to cart -
Lead-Free Solder – 6'
Newer lead-free solders have been getting better and better. We recommend this SAC305, no clean flux core, solder for your projects!$2.50 USDIn stock
Add to cart -
Battery Holder 3-AA
$2.50 USDThis battery holder uses 3 AA cells to power your electronics, robotic or embedded project. You can do without, but MAN, when you need to hold 3AA cells, you'll need it!
In stock
Add to cart -
9V Battery Holder w/ Switch & 2.1mm Plug
$4.00 USDThis is a 9V battery pack with on/off switch and a 2.1mm barrel plug, you get both parts and will have to solder them together. Use this to battery-power your Arduino (or other electronic projects).
In stock
Add to cart
Reviews
There are no reviews yet.