Home / Equipment / 3D Printing / Filament / REFILL – PLA+ filament,1.75mm, RED,1kg/roll REFILL - PLA+ filament,1.75mm, RED,1kg/roll SKU: 60742-R REFILL – PLA+ filament,1.75mm, RED,1kg/roll$27.49 CAD eSun’s 1.75mm PLA+ is stronger and tougher than standard PLA filament.Out of stock SKU: 60742-R Categories: 3D Printing, Equipment, Filament Tag: cbe Description More Info Reviews (0) Description We’re pleased to carry eSun 3D printer filament. Excellent quality, vacuum packed, and on an easy-to-view transparent spool (unless if it’s a refilament refill). eSun is a top supplier of 3D printer filament, and we’re happy to be carrying their inventory. They are not some fly-by-night operation; eSun is an active part of the 3D printer community, and you’ll often see them represented at Maker Faires and 3D Printer Expos. We’ve even been to their labs at the Shenzhen University grounds where they develop and test their product. They take excellent care with their production methods, and each spool comes vacuum sealed in a pouch with moisture-absorbing desiccant. In short, eSun knows their stuff. We’re extremely happy with the quality and consistency of their material. Features: Like regular PLA, it is still 100% biodegradeable. Elongation at break is 29%. Regular PLA is 5%. That means it was tested to stretch 29% before finally failing. Izod impact Strength (receiving a sharp blow): PLA+ absorbs 7KJ/m2, where regular PLA is only 4.2KJ/M2 Refill rolls come without a spool but are wrapped for easy replacement on an empty eSUN spool. Split your eSUN spool by unscrewing the 2 metric bolts with a 5mm hex key. Unbag (DON’T CUT THE STRAPS) the replacement spool Insert the spool (cardboard sleeve and all) onto one of the half-spools Re-assemble the spool NOW CUT the straps. All good to go! Specifications: Base chemistry: polylactic acid biodegradable thermoplastic 1.75mm nominal diameter (spec’d +/- 0.05, but is in practice closer to +/- 0.03) 1kg of plastic wrapped but without spool Suggested build parameters: Print temperature 190-210°C Base temperature: 0/65°C Feed speed: 30-90mm/s Idling speed: 90-150mm/s Please note: Colors may appear to vary slightly due to display differences on your computer hardware. More Info Weight 1.455 kg Dimensions 20.5 × 20.5 × 7.5 cm Diameter 1.75mm Type PLA / PLA+ Weight 1kg Filament_Color Red Reviews There are no reviews yet.Only logged in customers who have purchased this product may leave a review. Related products SparkFun DC/DC ConverterSKU: 50515Need a tidy DC-to-DC converter? This SparkFun breakout board offers 6 amperes of conversion, taking any DC voltage between 4.5-14VDC, and turning it to a selectable voltage between 0.59 and 5.5VDC.$28.59 CAD Out of stockRead more Smoke Absorber, Replacement FilterSKU: 44200The Smoke Absorber, Replacement Filter is the perfect replacement filter for your HAKKO Smoke Absorber.$8.79 CAD In stockAdd to cart 1/8″ Square Solar CellSKU: SCPDThese are small 1/8" square clear-epoxy encapsulated solar cells generating about 1/2 volt @ 1.9mA in sunlight.$1.79 CAD In stockAdd to cart Hakko Replacement Tip 1.2SKU: 44130The Hakko Replacement Tip 1.2 is a high quality replacement tip for the Hakko 888 or 936 solder station.$12.39 CAD In stockAdd to cart Hakko CHP Wire StrippersSKU: 43070The Hakko CHP Wire Strippers are perfect for stripping 7 different wire gauges ranging from 26 to 16.$16.89 CAD In stockAdd to cart
There are no reviews yet.