eSun 1.75mm PLA+ Black Filament - 5kg Spool

(extra-big) BOO-YAH. This is just like the fabulous 1.75mm PLA+ filament, but in a bigger, BIGGER SPOOL. No more 4AM filament swaps during your life-size Ryan Reynolds-hugging-Pikachu print!

Note: This has serious mass. We strongly suggest you have an appropriate spool holder and/or feeder-assist to not overload your printers wee extruder motor.

eSun is a top suppliers of 3D printer filament, and we're happy to be carrying their inventory. They are not some fly-by-night operation; eSun is an active part of the 3D printer community, and you'll often see them represented at Maker Faires and 3D Printer Expos. We've even been to their labs at the Shenzhen University grounds where they develop and test their product. They take excellent care with their production methods, and each spool comes vacuum sealed in a pouch with moisture-absorbing desiccant.

In short, eSun knows their stuff. We're extremely happy with the quality and consistency of their material.

Features:

• Elongation at break is 29%. Regular PLA is 5%. That means it was tested to stretch 29% before finally failing.
• Izod impact Strength (receiving a sharp blow): PLA+ absorbs 7KJ/m², where regular PLA is only 4.2KJ/M²
  

Specifications:

• Base Chemistry: Polylactic acid thermoplastic
• 1.75mm nominal diameter (spec'd +/- 0.05, but is in practice closer to +/- 0.03)
• Monsterously large 5kg spools
• Suggested build parameters:
  • Print temperature 190-210℃
  • Base temperature: 0/65 °C
  • Feed speed: 30-90mm/s
  • Idling speed: 90-150mm/s