eSun 1.75mm ePA Carbon Fiber - 1kg Spool SKU: 61006
eSun 1.75mm ePA Carbon Fiber – 1kg Spool
$53.95 USD
This 1.75mm ePA filament from eSun is a unique mix of nylon and carbon fiber.
In stock
Description
Carbon fiber is a very strong, light material, and is a well-known method to make a matrix material much stronger. eSun has incorporated carbon fiber into this material to make it very stiff. It’s tougher to print than ABS, as it requires a printer capable of even higher temperatures and a very hot bed, but if you are requiring a strong 3D printed model, this is the material for you.
Features:
- Environmentally friendly, nylon based, 20% carbon fiber
- Prints smoothly, odourless, with a matte finish
- High strength, high rigidity, tough, wear resistant
- Lower shrink rate and distortion compared to nylon
- Good flame resistance, with flame-retardant level UL94-V2
- A stainless steel nozzle is strongly recommended. It’s a fairly abrasive filament that will wear out your nozzle.
Specifications:
- 1.75mm nominal diameter (spec’d +/- 0.05, but is in practice closer to +/- 0.03)
- 1kg spools on LARGE diameter (easy unspooling) reels, vacuum sealed with desiccant
- Suggested build parameters:
- Print temperature 240-260 ℃
- Base temperature: 80 °C
- Print speed: 30-60 mm/s
- Movement speed: 90-150 mm/s
Material Characteristics:
- 85MPa Tensile Strength (vs 65MPa for PLA+)
- 16% elongation at breaking point (vs 12% for PLA+)
- 15.5 KJ/m² IZOD impact strength (vs 4 KJ/m² for PLA+)
ESun is a top supplier of 3D printer filament, and we’re happy to be carrying their inventory. They are not some fly-by-night operation; eSun is an active part of the 3D printer community, and you’ll often see them represented at Maker Faires and 3D Printer Expos. We’ve even been to their labs at the Shenzhen University grounds where they develop and test their product. They take excellent care with their production methods, and each spool comes vacuum sealed in a pouch with moisture-absorbing desiccant.
In short, eSun knows their stuff. We’re extremely happy with the quality and consistency of their material.
More Info
Weight | 1.455 kg |
---|---|
Dimensions | 20.5 × 20.5 × 7.5 cm |
Diameter | |
Type | |
Weight | |
Filament_Color |
Only logged in customers who have purchased this product may leave a review.
Related products
-
DSO Nano – Pocket-Sized Digital Oscilloscope
SKU: 50850This hand-sized oscilloscope is a capable addition to your electronics toolbox.$109.95 USDOut of stock
Read more -
SparkFun DC/DC Converter
SKU: 50515Need a tidy DC-to-DC converter? This SparkFun breakout board offers 6 amperes of conversion, taking any DC voltage between 4.5-14VDC, and turning it to a selectable voltage between 0.59 and 5.5VDC.$21.95 USDOut of stock
Read more -
Parallel Cable, 8 ft.
SKU: 14020$8.95 USDThe cable features a DB25 Male to DB-25 Female and can be used for programmers with parallel interfaces or as a printer extension.
In stock
Add to cart -
Hakko CHP Needlenose Pliers, Smooth
SKU: 43060The Hakko CHP Pliers are perfect for gripping fine and/or delicate components, leaving them unmarked.$12.95 USDIn stock
Add to cart -
37 x 33mm Monocrystalline Solar Cell
SKU: SCC3733This epoxy-encapsulated monocrystalline solar cell offers 6.7V and 20mA in a 37x33mm package. Now updated with the Miller Engine circuit!$8.00 USDIn stock
Add to cart
Reviews
There are no reviews yet.