Matter3D's performance PLA 1.75mm filament comes in 1kg spools and is high impact, high temperature, and FDA approved (food and beverage use) material.
Canadian made by Artisanal Scientists! (Can you call it Artisanal if it's compounded & manufactured by a couple of material scientists?)
This is good stuff. We've been evaluation printing with this and it's been very satisfactory. Yes, it comes at a premium, but balance that off against how many prints you've had go AWOL when you look away from it. And it's domestically made and fresh.
Matter3D (M3D) takes the consumable nature of their products seriously. They are now moving their filament to cardboard spools, and more-easily recycled natural cardboard boxes.
M3D’s Performance PLA is a high-strength, higher (than normal PLA) temperature, and FDA approved (food and beverage use) material. It's designed for higher-heat applications (up to 85°C) applications and often exceeds ABS's performance. Another interesting feature of this material is heat-annealing. M3D suggests that you can improved the mechanical characteristics of a print by heating it t0 80~130°C for up to 30 minutes in either a hot-air or water bath.
Note: Sold in individual 1kg spools.
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.