eSun 1.75mm ePLA-Silk Mystic Triple-Color Copper/Purple/Green Filament - 1kg Spool

USD $30.75

eSun’s Silk-Mystic extrudes 3 colors into your model - at the same time!

In stock

SKU: 61270 Categories: , ,


Weird. Who thinks it'd be a good idea to extrude 3 colors at once? Two colors are weird (and print funky!), but it's a seriously demented engineer that thinks "Hey, I think the Reynolds numbers of this molten plastic is sufficient that we can merge 3 material streams into one homogeneous strand." I mean, REALLY. Still, here we are. Triple-color filament. Welcome to the brave new world.

It's pretty impressive actually. You'd think that a split-color filament would schmoosh together in the nozzle, but the viscosity of the plastic just makes it get thinner, just like how candy-makers pull candy-canes into multi-colored strands. The end result is that your printed model changes color depending on how it's rotated. It's really a surreal effect, especially with the metallics.

eSun is a top supplier of 3D printer filament, and we're happy to be carrying their inventory. They are not some fly-by-night operation; eSun is an active part of the 3D printer community, and you'll often see them represented at Maker Faires and 3D Printer Expos. We've even been to their labs at the Shenzhen University grounds where they develop and test their product. They take excellent care with their production methods, and each spool comes vacuum sealed in a pouch with moisture-absorbing desiccant.

In short, eSun knows their stuff. We're extremely happy with the quality and consistency of their material.


  • 100% Biodegradable.
  • Side-by-side-by-side triple-colored Copper/Purple/Green filament


  • Base chemistry: polylactic acid biodegradable thermoplastic
  • Elongation at Break: 5%.
  • Izod impact Strength (receiving a sharp blow): 4.2KJ/M2
  • 1.75mm nominal diameter (spec'd +/- 0.05, but is in practice closer to +/- 0.03)
  • 1kg spools on transparent LARGE diameter (easy unspooling) reels, vacuum sealed with desiccant
  • Suggested build parameters:
    • Print temperature 190-210℃
    • Base temperature: 0/65 °C
    • Feed speed: 30-90mm/s
    • Idling speed: 90-150mm/s



Additional information

Weight 1.455 kg
Dimensions 20.5 × 20.5 × 7.5 cm




, ,


Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved