eSun 1.75mm PLA Luminous eStar "Galaxy" Black Filament - 1kg Spool SKU: 61252
Home » eSun 1.75mm PLA Luminous eStar “Galaxy” Black Filament – 1kg Spool
eSun 1.75mm PLA Luminous eStar “Galaxy” Black Filament – 1kg Spool
$31.29 USD
Glow-in-the-Dark Galaxy-Black PLA filament by eSun. Looks like standard black until the lights go out, and the luminous green flecks start glowing!
In stock
Description
Another black filament. *YAWN*…until the lights go out. Then it reveals the luminous green flecks embedded in the print – you’ve got a steal night-time glow-in-the-dark print!
It appears as a standard black PLA, but the luminous effect is quite nice when the lights go out. It’s best to print thin-shell objects for the best effect, as to allow the best UV absorption by the flecks in the black plastic.
eSun is a top supplier of 3D printer filament, and we’re happy to be carrying their inventory. They are not some fly-by-night operation; eSun is an active part of the 3D printer community, and you’ll often see them represented at Maker Faires and 3D Printer Expos. We’ve even been to their labs at the Shenzhen University grounds where they develop and test their product. They take excellent care with their production methods, and each spool comes vacuum sealed in a pouch with moisture-absorbing desiccant. In short, eSun knows their stuff. We’re extremely happy with the quality and consistency of their material.
Features:
- Black appearance in daylight; luminous green glow-in-the dark flecks in the dark!
- Based on PLA formulation, meaning the same excellent PLA printing performance.
- Elongation at break 11.8%. That means it was tested to stretch almost 12% before finally failing.
- Izod impact Strength (receiving a sharp blow): 5.4KJ/M2
- Melt Flow Index (grams/10minutes): 3.5 (190°C / 2.16kg)
- 1.2grams / cm3 density
- 72MPa (10.4kpsi) Tensile Strength
- Heat-distortion temperature of 53°C
Specifications:
- Base chemistry: polylactic acid thermoplastic
- 1.75mm nominal diameter (spec’d +/- 0.05, but is in practice closer to +/- 0.03)
- 1kg spools on LARGE diameter (easy unspooling) reels, vacuum sealed with desiccant
- Suggested build parameters:
- Print temperature 210-230℃
- Base temperature: 45-65 °C
- Printing speed: 40-100mm/s
More Info
Weight | 1.455 kg |
---|---|
Dimensions | 20.5 × 20.5 × 7.5 cm |
Diameter | |
Type | |
Weight | |
Filament_Color |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Parallel Cable, 8 ft.
SKU: 14020$8.95 USDThe cable features a DB25 Male to DB-25 Female and can be used for programmers with parallel interfaces or as a printer extension.
In stock
Add to cart -
Hakko CHP Needlenose Pliers, Serrated
SKU: 43061The Hakko CHP Pliers are perfect for getting a firmer grip on small components.$13.23 USDIn stock
Add to cart -
24 x 33mm Monocrystalline Solar Cell + MSE Circuit
SKU: SCC2433B-MSEThis epoxy-encapsulated monocrystalline solar cell generates a nominal 4.5V / 18mA (sunlight) from a 24x33mm package. And has an integrated solarengine circuit board!$6.50 USDIn stock
Add to cart -
Hakko Replacement Tip 1.2
SKU: 44130The Hakko Replacement Tip 1.2 is a high quality replacement tip for the Hakko 888 or 936 solder station.$9.50 USDIn stock
Add to cart -
Hakko CHP Needlenose Pliers, Smooth
SKU: 43060The Hakko CHP Pliers are perfect for gripping fine and/or delicate components, leaving them unmarked.$12.95 USDIn stock
Add to cart
Reviews
There are no reviews yet.