Material change-over in a 3D printer nozzle can leave some funky chemistry buildup that can lead to clogs and jams. Clear it out with this filament specifically designed for that purpose.
There's some good reason not to mix materials in your 3D printer nozzle. Material change-over from lower-temperature PLA to higher-temperature can lead to the PLA burning up in the nozzle and sticking to the interior of the chamber, and becoming an obstacle to proper feed and operation.
eSun is the first to manufacture a filament specifically for cleaning out nozzles between changeovers.
eSun recommends feeding a 150cm (~6") length through the printer head to absorb and pull through old material. For a Bowden-style feeder, snip a length, and push it through the system ahead of your new material. If your blockage is too large to be pushed through, you will need to retract the cleaning filament manually from the rear.
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.