Star Controller - 3 Watt RGB Star LED Controller Kit SKU: 60160
Home » Star Controller – 3 Watt RGB Star LED Controller Kit
Star Controller – 3 Watt RGB Star LED Controller Kit
$22.00 USD
The larger 3 watt RGB LEDs are very bright and colorful, but if you don’t get the power just right – POOF! Now your RGB is R(nothin’)B. The Star Controller tames this LED so you can power it up with 5 to 12V and use any regular 5V signal to control each channel.
In stock
Description
RGB LEDs are fun. LARGE RGB LEDs are even more fun, but with their funky current requirements, you usually have to pick and tune transistors to make it suitable for your project. And if you get it wrong, your RGB turns into an R(nuthin’)B.
Kit Includes
- 3-watt 43,000 millicandela, 120° viewable RGB lumen equivalent)
- 350mA constant-current regulation per color channel
- 5~12VDC nominal operation; (4~13VDC maximum range)
- FET PWM switching tested up to 80kHz PWM control
- 5V logic level compatible (3.3V inputs = reduced illumination)
- Large 1.9″ PCB with heat-dissipation strips
- #2 hardware compatible mounting holes
We even found a convenient diffuser container to make it appear HUGE.
Simply put, this kit is a great way to simply add a powerful, colorful LED to your project. Check the resource page for Arduino and SB-FireFly sample code.
As the constant-current regulators are a linear device, they generate a noticeable amount of heat, especially at the higher input voltage levels (see the graph in the documentation). To counter this, use a 10W switching voltage regulator on the Vin line to the Star Controller to bring the high voltage efficiently down to 5~6V, where it will operate much cooler.
Oh, did we mention it’s a OSHW-compliant kit? Source documentation is available under the Documentation Tab.
Resources
More Info
Weight | 0.02 kg |
---|---|
Dimensions | 6 × 6 × 1 cm |
Only logged in customers who have purchased this product may leave a review.
Related products
-
Arduino Starter Bundle – Ultimate
SKU: 28936This kit is basically the same as the Ultimate Freeduino Starter Bundle, but it includes the Arduino Uno, which requires no extra soldering. It is a great way to get started on using Arduinos.$94.90 USDIn stock
Add to cart -
SB-Freeduino
SKU: 28920The Freeduino is based on the open source project version of the Arduino Diecimila. We've adapted the design for more convenience as a semi-kit!$26.00 USDIn stock
Add to cart -
Phidgets Humidity/Temperature Sensor
SKU: 33380This humidity/temperature sensor measures relative humidity from 10% to 95% with a typical error of ±2% RH at 55% RH$50.00 USDIn stock
Add to cart -
Freeduino Starter Bundle – Ultimate
SKU: 28931Ready to dive head-first into the waters of Freeduino Land (which is actually also known as "The Fabulous Republic of Arduino")? This comprehensive bundle is what you're looking for.$91.79 USDIn stock
Add to cart -
Solarbotics SolarSpeeder v2.0
SKU: K SSThe SolarSpeeder 2 Kit is a very quick Solaroller that can cover 3 meters (10 feet) in under 40 seconds in direct sunlight.$27.50 USDIn stock
Add to cart
Reviews
There are no reviews yet.