PCBGrip Tri Nut Accessory (pairs)

USD $4.60

Inserting and aligning nuts into Openbeam can be a bit tricky, but this clever, simple tri-nut insert is a simple, effective solution to the problem.

In stock (can be backordered)

SKU: 52822 Categories: , , Tag:


Sometimes aligning up the 3mm nuts into Openbeam channel can be a real trick, like those tricky ball-bearing puzzles. Fortunately, PCBGrip has made these really nice "tri-nuts", which are three M3 threaded holes spaced 15mm apart in a handy plate.

Slide the plate into an Openbeam rail, and you'll find they line up easily and precisely with the holes in your PCBGrip accessories.


  • 3 x M3 threaded holes, on 15mm centers
  • Stainless steel plate
  • Openbeam compatible


Additional information

Weight 0.009 kg
Dimensions 4.5 × 1.5 × 1.5 cm


Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved