WeMos D1 Mini - 4MB Microcontroller SKU: 29260
Home » WeMos D1 Mini – 4MB Microcontroller
WeMos D1 Mini – 4MB Microcontroller
$9.19 USD
The WeMos D1 Mini makes working with the ESP8266 module simple! Breadboard compatible and equipped with a micro USB jack, build your next Internet of Things project in a snap.
In stock
Description
Based on the ESP8266 module, this WeMos D1 Mini makes programming and interfacing a breeze. With its built in reset/programming circuitry you no longer have to worry about pressing any buttons when uploading your code to the device. It also comes with a handy micro USB jack for power and communication and a little side mounted reset button.
Formally, the ESP8266 is a system-on-a-chip (SOC) that has a TCP/IP stack built in. It’s sort taking a Wifi controller and squeezing out the extra pins and processing power as a pretty capable Arduino-compatible microcontroller. The ESP8266 can manage all Wifi networking, or pass that onto another processor to do. As it is, it come preloaded with an AT command set, so you can use any microcontroller to set all necessary communication parameters through simple serial connections.
To manage this Wifi magic, the ESP8266 has a 80MHz 32-bit processor, with power to spare to drive other functions besides Wifi. It offers 16 GPIO pins, 64kB instruction RAM and 96kB of data RAM besides the 4MB external flash. This means there’s little more you have to add to it to have the ESP8266 monitor sensors and toggle I/O lines (using 3.3V logic levels).
Note: The WeMos D1 Mini is not capable of 5-3V logic shifting and will require an external Logic Level Converter. Please do not power it directly from your 5V development board.
Specifications
- ESP8266 Module
- 4MB Flash
- 3.0 ~ 3.6V (recommendation 3.3V)
- 80mA Nominal working current
- FCC / CE / TELEC Certifications
- 802.11 b / g / n
- 2.4GHz-2.5GHz (2400M-2483.5M), PCB trace antenna
- UART / HSPI / I2C / I2S / Ir Remote Control / GPIO / PWM
- 24 x 16mm PCB, 2×8 catellated connections
- Operating temperature: -40°C ~ 125°C
Links
- Huge amount of information on http://www.esp8266.com/ community forum!
- NodeMCU (Lua for ESP8266) webpage with examples and documentation on the Lua framework
- Arduino IDE support for ESP8266
- USB drivers can be found here
More Info
Weight | 0.0092 kg |
---|---|
Dimensions | 9 × 5.5 × 0.5 cm |
Ecosystem |
Only logged in customers who have purchased this product may leave a review.
Related products
-
6mm Sintra
SKU: SIN6mmThis 8x12 inch, 6mm thick expanded PVC sheet has excellent robot-building characteristics.$5.75 USDIn stock
Select options -
Push Pogo Pin 6 – 6 Point
SKU: PP6This 33mm (1.3") long 6-groove tipped pogo pin probe is normally used for electronic JTAG uses, but we used them for bots!$1.25 USDIn stock
Add to cart -
AXE Stack-18 Kit
SKU: 28570This great kit lets you easily program your PICAXE 18M2 IC on a breadboard with many additional features.$19.95 USDIn stock
Add to cart -
Push Pogo Pin 4 – Cup Tip
SKU: PP4This 33mm (1.3") long cup-tipped pogo pin probe pin is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
50-Series Push Pogo Probe Holder
SKU: PPH-50This little devices allow you to simply and easily install and replace existing 50-series pogo pins$1.50 USDIn stock
Add to cart
Reviews
There are no reviews yet.