Polycarbonate Enclosure, Water Resistant, Clear Lid - 119x119x80mm (4.7x4.7x3.2in) SKU: 137559
Home » Polycarbonate Enclosure, Water Resistant, Clear Lid – 119x119x80mm (4.7×4.7×3.2in)
Polycarbonate Enclosure, Water Resistant, Clear Lid – 119x119x80mm (4.7×4.7×3.2in)
$27.19 USD
1554P2GYCL – Suited for mounting printed circuit boards or DIN rail mounted components. A Gasketted lid provides protection against oil, dust, and water.
In stock
Description
Hammond 1554P2GYCL
Features:
- Ideally suited for mounting printed circuit boards or DIN rail mounted components
- Polycarbonate is UV stabilized for outdoor use. Gray polycarb carries a UL94-5VA rating, while clear and smoked lids carry a UL94V-0 rating.
- Polycarbonate versions are cUL and UL 508A listed (File # E65324).
- Enclosure color is a light gray (RAL 7035).
- Gasketed lid with two-piece “tongue & groove” construction provides protection against access of oil, dust and water.
- Replaceable gasket is one piece made from high temperature, U.L. listed silicone. Supplied loose inside the enclosure (not pre-installed).
- Polycarb is designed to meet NEMA Type 4, 4X, 6, 6P, 12 & 13 ratings which meet and exceed IP ratings up to and including IP68. (Except 1554/55 V size which is 4,4X only)
- Lid is secured with included M4 stainless steel machine screws which are threaded into integral stainless steel bushings for repetitive assembly & disassembly. All hardware is stainless steel to avoid corrosion caused by dissimilar metals.
- Lid screws are self captivating (lid holes are threaded with the first installation of lid screws).
- Internal features are maximized for mounting options and vary with size:
- Internal DIN rail mounting tabs molded into most models, except sizes “C” and “D”.
- Threaded (M3) integral brass inserts and/or standoffs (#6 self tapping screws) for P.C. board or inner panel mounting in all but the smallest size (“B”).
- Vertical P.C. card guides (for 1.5 mm thick P.C. boards) are molded in all but the smallest size (“B”).
More Info
Weight | 0.272 kg |
---|---|
Dimensions | 14.40 × 14.30 × 9 cm |
Material | |
Color | |
IP Rating | |
Type | |
Feature |
Related products
-
Push Pogo Pin 4 – Cup Tip
SKU: PP4This 33mm (1.3") long cup-tipped pogo pin probe pin is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
Push Pogo Probe Holder
SKU: pph2Pogo-Pin probe holders for 1.01mm diameter pins$1.25 USDIn stock
Add to cart -
AXE Stack-28 Starter Kit (USB)
SKU: 28621Brand new to PICAXE? Here's an all-in-one bundle to get you started from the ground-level using the PICAXE 28 and a USB Cable interface$84.09 USDIn stock
Add to cart -
50-Series Push Pogo Probe Holder
SKU: PPH-50This little devices allow you to simply and easily install and replace existing 50-series pogo pins$1.50 USDIn stock
Add to cart -
2mm White Sintra
SKU: SIN2mm-WThis 2mm thick 8x12" expanded PVC sheet has excellent robot-building characteristics.$2.85 USDIn stock
Add to cart