Aluminium Extruded Enclosure, Aluminium End Panels, Black - 120x78x43mm (4.7x3.1x1.7in) SKU: 137539
Home » Aluminium Extruded Enclosure, Aluminium End Panels, Black – 120x78x43mm (4.7×3.1×1.7in)
Aluminium Extruded Enclosure, Aluminium End Panels, Black – 120x78x43mm (4.7×3.1×1.7in)
$22.09 USD
1455K1201BK – Designed to house printed circuit boards or for equipment interfacing. Sized for standard Eurocards with horizontal rails for mounting.
Out of stock
Description
Hammond 1455K1201BK
Features:
- Designed to house P.C. boards or for equipment interfacing.
- Sized for standard Eurocards.
- P.C. boards mount horizontally by sliding into internal slots extruded into the enclosure body.
- Rugged body constructed from extruded aluminium with a minimum thickness of .06” (1.5 mm).
- Extruded body includes a slide removable “belly” plate – except in smaller sizes “A” through “D”.
Includes:
- Versions with metal end plates include two aluminium end panels – finish matched to the extruded aluminium body – and two black ABS plastic bezels (your option to install).
- Versions with plastic end plates include two all-plastic end caps.
- Extruded aluminium body.
- Self-adhesive rubber feet.
- All hardware – end panel screws are #6 x 3/8” TTT – thread rolling, steel screws with a #4 flat head Phillips drive. Zinc plate finish – either clear or black (black screws are used on the black, blue & red models).
- NOTE: Recommended screw torque is 5 lbf-in
More Info
Weight | 0.193 kg |
---|---|
Dimensions | 13.80 × 8.70 × 5 cm |
Material | |
Color | |
IP Rating | |
Type |
Related products
-
Push Pogo Probe Holder – Style 40 size
SKU: PPH-40This is the holder for our now discontinued PP8S short pogo pins.$1.50 USDIn stock
Add to cart -
Push Pogo Pin 8 – Round End
SKU: PP8This 33mm (1.3") long round-tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
Push Pogo Pin 3 – Chisel Point
SKU: PP3This 33mm (1.3") long poker-tipped pogo pin probe is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
50-Series Push Pogo Pin – 4-Sided Point
SKU: PP2-50This smaller, 16.4mm long cone-tipped pogo/probe ping is normally used for electronic JTAG uses, but we use them for bots!$1.50 USDIn stock
Add to cart -
Magnet
SKU: Mag1These 3/4" Neodymium magnets are very strong. Useful for all kinds of Magbot experiments or just holding posters up on metal surfaces as we like to do!$2.75 USDOut of stock
Read more