Another Friday has arrived, and with it we have some new mounting hardware and buttons to look at: Pololu Mini Plastic Gearmotor bracket Pair - Wide $3.25 Affix our GM6 and GM7 motors to any project with these plastic motor brackets. Pololu Mini Plastic Gearmotor bracket Pair - Tall $3.25 Affix our GM6 and GM7 […]
More PICAXE Goodness
Dave Hrynkiw
May 1, 2009
Boy oh boy, it's been a busy week for PICAXE stuff. We actually got a big ol' shipment in late last week, which included the new 40X2 chips. And by now we've receiveded everything, including even more X2 chips. But this time they're of the 28-pin variety. (Don't worry, the 28X1's haven't gone the way of the dodo bird... yet...)
Just like the 40X2's we mentioned last week, the 28X2 comes in both regular and a low-voltage versions. Here are the improvements in the 28X2 revision over the 28X1:
- Up to 4 internal program slots and 32 external program slots
- Increased RAM, up to 256 bytes + 1024 bytes scratchpad
- Increased operating speed, up to 40MHz
- Individual pin input/outut control
- 0-8 ADC pins available
Aside from that, we also received stock on the PICAXE-20M IC and the PICAXE-18X IC. They're now back online and can be purchased at your desire. We got lots of 'em too, so get as many as you want.
We have just one more tidbit to include before the end of this week's newspost. Over at the HydraRaptor blog, the auther, nophead, wrote a great little article detailing how to convert/hack one of our GM17's into a stepper motor. He uses some of the neat-o Didel accessories we added a few weeks back, specifically the replacement gears. You can read the article right here.
MORE POSTS
Wednesday Links: Flashlights, Lanternbot...
Spring this year seems to be short on sunshine. To compensate for that, today's post is full of shiny things. And butterflies. Butterflies are always a good addition. Tilt Beam Flashlight Cute build, a diffuser of some sort would be a nice addition though, unless used for interrogation purposes. (by [Zach DeBord], via Hackaday) Soft […]
3D Printed frame for Line Follower
Ohhh, we like 3D printers. We're working with the local Protospace to fund-raise for a Makerbot. I want to see one of these Line Follower chassis (especially as some of the parts look particularly familiar!). LOVE open source hardware!
OpenBeam's Fantastic Kossel Pro 3D Print...
It's pretty amazing to see the adoption rate of 3D printers in the last few years, and the kind of creativity they bring out in people. I've seen quite a few variations, particularly while walking through the 3D printer villages at the MakerFaires I've already attended (either as a vendor or just a visitor), but […]
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!
Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.
Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.