DIY Halloween RGB LED Kitty Ears

Solar botics
October 10, 2016

ears-banner2Simple cosplay cat ears made out of Fosshape, decorated with rhinestones and complete with RGB LEDs for color changing effect.

Materials:

  • Fosshape 300
  • 2 x slow scroll RGB LEDs
  • 2 x CR2032 coin cell batteries
  • 2 x coin cell battery holders
  • 100 flatback rhinestones
  • 2 x hairclips
  • fake fur
  • steel ball chain

Tools:

  • scissors
  • heat gun/steamer
  • glue gun
  • needle and thread

Step 1: Cut out the paper template

Define the height you want the ear to be - by holding a ruler up to you head (highly scientific approach) - and build a triangle similar to shown. You can use these shown measurements as a guidelines - but your proportions might be a little different.

Adjust the shape to have the curves following a more natural outline of the ear. Cut out the paper triangles..

img_20160920_1240533

Step 2: Cut out Fosshape

Trace the template onto the Fosshape. Cut out 2 large shapes and 4 smaller shapes for the base of the ear (two bases per ear).

img_20160913_1747221

Step 3: Sew the ear parts together

Sew each ear shape to one base:

img_20160913_174936

Step 4: Harden the Fosshape

Now shape and harden the ears using a steamer or heat gun. They will shrink about 1.5 times (left ear treated with heat and right one not yet shown for comparison), so take that into consideration when choosing the final product size.
img_20160914_121406

Step 5: Attach the hair clip

Sew the second bottom to the ear and insert the hair clip. Heat shrink the bottom layer.

img_20160913_174935

 

Step 6: LED

Insert the LED into the inside of the ear with legs poking out from the other side.

img_20160914_125628

 
Step 7: LED Batteryimg_20161111_151534

Insert the legs into the battery holder so that the longer (positive) leg is closer to the outside.
 
img_20161111_151629
Insert the battery (positive side facing out) - it should be very snug. If everything is done correctly, your LED should light up right away. If not, then readjust the LED legs until the light is on.
untitled-1
Bend the LED legs as shown above, kind of in a Z shape: 1st bend near the top of LED, towards the top of the ear, and second the opposite direction so that the whole contraption sits flat against the surface.
 
img_20161114_115315
Stitch the holder down using the holes provided. Use some hot glue to secure the holder to the fabric if needed.

Step 8: Rhinestones

Now the fun part - use hot glue to attach the flatback rhinestones to the inside of the ear.

img_20160914_162805

Step 9: Fur

Use small tufts of fake fur to disguise the bottom of the ear. Sew them in place.

img_20160915_115859

Step 10: Finishing
Optional - use some cord/ribbon (in this case a ball chain) to finish the ear edges!

img_20160920_132224-copy

catearsimg_06682

 

MORE POSTS

May 16, 2005
Testimonials...

You know, I had a page of our customer testimonials put together, and I just had the opportunity to sit and read it a bit. That's a pretty impressive page, even if I do say so myself! If you have any reservation about ordering from Solarbotics, I encourage you to take a quick look at […]

December 6, 2000
New Kit!The Hex Pummer

View our newest kit we have online, the Hex Pummer, a very amusing night display that is charged by the sun. When the lights go out, it triggers the high intensity LEDs to start flashing on and off. They start out very STRONG and then fade away until the next LED "PUMMS" on. These amusing […]

August 9, 2006
Another New Gearmotor - The GM19!

Here's a funky motor for you - the GM19! Slightly larger than the other metal gearhead series (GM11-14), and with a larger motor, this 35:1 beasty looks like a good contender for building mini-sumos or other small, speed-hungry robots! But be warned: It is a bit strange. The gearhead is mounted askew to the motor, […]

August 28, 2012
Project Mon(Tues)day: Pinewood Lowrider

Jerome, our squiggly-bearded intern from many moons ago that created the BeetleBot, just pointed us towards this totally pimpin' pinewood derby car. The author from sliptonic.com shows how he made his sweet lowrider with hydaulic(esque) action by using a small micro-servo for each wheel, an Ardweeny for brains, and a 9V battery for power. The […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart