DIY Halloween RGB LED Kitty Ears

Solar botics
October 10, 2016

ears-banner2Simple cosplay cat ears made out of Fosshape, decorated with rhinestones and complete with RGB LEDs for color changing effect.

Materials:

  • Fosshape 300
  • 2 x slow scroll RGB LEDs
  • 2 x CR2032 coin cell batteries
  • 2 x coin cell battery holders
  • 100 flatback rhinestones
  • 2 x hairclips
  • fake fur
  • steel ball chain

Tools:

  • scissors
  • heat gun/steamer
  • glue gun
  • needle and thread

Step 1: Cut out the paper template

Define the height you want the ear to be - by holding a ruler up to you head (highly scientific approach) - and build a triangle similar to shown. You can use these shown measurements as a guidelines - but your proportions might be a little different.

Adjust the shape to have the curves following a more natural outline of the ear. Cut out the paper triangles..

img_20160920_1240533

Step 2: Cut out Fosshape

Trace the template onto the Fosshape. Cut out 2 large shapes and 4 smaller shapes for the base of the ear (two bases per ear).

img_20160913_1747221

Step 3: Sew the ear parts together

Sew each ear shape to one base:

img_20160913_174936

Step 4: Harden the Fosshape

Now shape and harden the ears using a steamer or heat gun. They will shrink about 1.5 times (left ear treated with heat and right one not yet shown for comparison), so take that into consideration when choosing the final product size.
img_20160914_121406

Step 5: Attach the hair clip

Sew the second bottom to the ear and insert the hair clip. Heat shrink the bottom layer.

img_20160913_174935

 

Step 6: LED

Insert the LED into the inside of the ear with legs poking out from the other side.

img_20160914_125628

 
Step 7: LED Batteryimg_20161111_151534

Insert the legs into the battery holder so that the longer (positive) leg is closer to the outside.
 
img_20161111_151629
Insert the battery (positive side facing out) - it should be very snug. If everything is done correctly, your LED should light up right away. If not, then readjust the LED legs until the light is on.
untitled-1
Bend the LED legs as shown above, kind of in a Z shape: 1st bend near the top of LED, towards the top of the ear, and second the opposite direction so that the whole contraption sits flat against the surface.
 
img_20161114_115315
Stitch the holder down using the holes provided. Use some hot glue to secure the holder to the fabric if needed.

Step 8: Rhinestones

Now the fun part - use hot glue to attach the flatback rhinestones to the inside of the ear.

img_20160914_162805

Step 9: Fur

Use small tufts of fake fur to disguise the bottom of the ear. Sew them in place.

img_20160915_115859

Step 10: Finishing
Optional - use some cord/ribbon (in this case a ball chain) to finish the ear edges!

img_20160920_132224-copy

catearsimg_06682

 

MORE POSTS

February 13, 2017
New Product: Scribbler, Grove & Buc...

Grove - Smart Plant Care Kit for Arduino CAD 85.28 / USD 59.90 A functional kit that helps monitor the environment and care for plant growth! 200W Buck Module CAD 22.00 / USD 16.90 When mini buck converters just won't do. Grove - Ear-clip Heart Rate Sensor CAD 16.80 / USD 12.90 Grove Heart Rate […]

September 3, 2010
Closed Mon, Sept 6th, New Stuff

HEY! YOU! WE'LL BE CLOSED FOR LABOUR DAY AND THERE AIN'T NOTHIN' YOU CAN DO ABOUT IT! BAHAHAHA! *Ahem* It's true. On the day called Labour, we will be doing anything but.  Why is that? Nobody knows. But a day off is a day off, so we ain't complaining. Standard stuff applies - we'll answer […]

April 27, 2005
Sumovore Upgrade Kit

What's new at Solarbotics? We've just released our Sumovore Baseplate Upgrade Kit which will let you replace the mounting tape & zip-tie restraints with a black powder-coated steel baseplate! This upgrade makes the Sumovore much more robust, and also increases the mass for a more competitive edge. Note that all new Sumovores from Solarbotics will […]

February 19, 2004
Robosapien video on solarbotics.net

Well, Solarbotics went to "Neeewwww Yorrrrk City" to the Toy Fair, and met up with Mark Tilden. He was kind enough to give us an exclusive interview / demonstration of the production-level version of the Robosapien. See the four videos at solarbotics.net! Update: The link got slashdotted, so we're pretty heavy on our bandwidth bills […]

Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart