Propellor, Maker Faire

Dave Hrynkiw
May 8, 2009

Welcome ladies and gentlemen, to a special edition Evening News Post! That's right, it's way past the magical closing time here at Solarbotics but some of us are trudging onward. To what end, you wonder? Well, if you've seen that shiny orange promo banner up top you'll know why. MAKER FAIRE! Yup, just like the past few years we're once again gearing up to make the trip to sunny San Fransisco to show off all our wares. If you're in the Bay area, swing by to say hello. You'll also find a BUNCH of cool stuff at the faire - there's no possible way to explain all the awesome things we've seen at past shows. But until the 30th and 31st roll around, we're in gung-ho mode while we prepare. Fair  warning (Bahaha! Awesome pun!) - Solarbotics and HVW Tech will be closed from May 29th to June 1st, so you may want to plan ahead if you foresee an urgent order in your near future. We'll have more details regarding being closed as we get closer to the date.

But what if you're not going to be at Maker Faire? What if you just want more cool stuff instead? Don't worry, we have you covered with a brand spankin' new 2.55" Propellor from GWS. Check out that stats on this bad boy:2.55in Propellor

  • 63mm (2.5") long
  • 19mm (0.75") pitch (how much it theoretically moves forward in a single full revolution)
  • 1mm shaft hole diameter (easily drilled out to suit your motor)

It's online and ready for purchase, you know the drill. And that about wraps it up - have a great weekend everyone!

MORE POSTS

February 20, 2010
More Temperate Sensors

Alrighty folks, here you have it. We've just doubled the amount of items in our temperature sensor category by adding the following: Temperature Probe Phidgets Precision Temperature Sensor Sensirion Temp/Humidity Sensor Thermocouple Kit DS2760 DS18B20+ Temperature Sensor TMP36 Temperature Sensor And that pretty much rounds out all the temperature sensors we have planned to make […]

October 16, 2002
Junkbots available!

We're proud to announce that we just got our shipment of 'Junkbots, Bugbots, and Bots on Wheels' tonight! The first 100 books will come signed by Dave Hrynkiw, and come with a free GM2 or GM3 gearmotor!

April 1, 2004
New Kits: The Spazovore and the SunSwing...

Yup, we've got a few new kits ready, the Spazovore beginner's kit, and the SunSwinger Pendulum kit. We're pretty happy with both of these kits, so scroll down a bit, and read about them below!

December 4, 2003
Updated Minisumo/Linefollower code

Fixed a reset problem in the sumo code, turns out the a If...Then statement does not store its location on the stack. Ergo the return instruction at the bottom of the turn function was pulling a random location. Anyway a change from a return to a goto and everything is shipshape, savvy? Then download the […]

1 2 3 252
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart