Project: Switching Beds for a Better Cut

Dilan Tuff-Overes
August 9, 2018

We laser lots of wood and acrylic... like seriously, it's hundreds if not thousands of sheets per year. This volume of throughput tends to cause the lasers to build up a lot of gunk and debris that needs to be cleaned on a regular basis. Besides being safer, it reduces the "flash" marks which are little black marks on the bottom of the material where the laser has burned through the material and reflected off the support table back to the underside of what was being cut.

Selecting the best surface used to support your lasered material comes down to a few options to which you need to ask:

  1. Is my project super heavy, or do I not care about table damage, scorching and just want a flat worksurface surface? (Use a flat metal tabletop)
  2. Are my parts small or risk being lost after being cut? (Use honeycomb)
  3. Do I want to minimize flash marks on my part? (Use slat)
  4. Am I doing the same thing over and over again and want best performance? (Use custom pin-table)

We've used all four methods at Solarbotics (five, if you include the rotary attachment for engraving ...pop bottles), with the honeycomb being the often used solution, but after our last laser cleanup, we've revisited the slat system.

Our latest designs are larger and better tabbed so they stay together. The slat system is ideal for these jobs, with its better managing of debris build-up, and vastly reduced flashing. Less support material below the cut means there's less to get in the way. For comparison, this is what a traditional honeycomb table looks like after a few months of cutting MDF (ug!). Look at that old and crufty thing... and the honeycomb too.

Now take a look at our new cleaned and re-slatted table! It's almost too clean...

As nice as it is, this bed of slats has no indexable edge for us to register our material against. Finding a common origin point on the bed crucial in production, so we used the laser to create our own registration edge!

Using the laser to laser parts for the laser... for better lasering...

Here are the results:

With this in place, we're ready for even higher quality laser cutting.

MORE POSTS

January 13, 2003
BEPApp 3 - SPSH3

With all the interest with Wilf's "Power Smart Head", we thought it'd be an ideal project to mount on our Bicore Experimenter's PCB. To make the project work, we're even stocking the 74HC240! Check it out under the "Special Projects" link, or click here.

August 22, 2012
Wednesday Cool Links: Car Radar and... H...

Ok folks, here it is. Your weekly dose of links. Enjoy it. Love it. Let it soak into your skin. Bask in its magnificence. Bravit, The Multi-flame Candle This link comes to you straight out of 2008, but it's still pretty awesome. This is a candle that has a wick that branches out to create […]

November 7, 2004
PDXBot Video

We just received an inventory of PDXBot.04 DVDs that we're selling in part to raise funds for the Portland Area Robotics Society (PARTS). It's a pretty hefty video - over 2 hours long, with many features, including a few cameos of "The Dave and Grant Show" (we were there competing last year). It's a good […]

February 19, 2014
Wednesday Links: Flying Jellyfish Robot,...

Now, one things got my attention in today's links: aerojelly. Wouldn’t you like to have a pet aerojelly? It flaps, it flies, it comes with a leash, which is a power cord at the same time. The rest of links is accessories that include music for aerojelly, wireless LEDs for aerojelly, and a pack of […]

1 2 3 252
Solarbotics Ltd Logo
Solarbotics has been operating for more than 25 years, bringing electronics know-how and supplies to both the electronics professional and hobbyist. We'll be happy to help you too!

Solarbotics, Ltd. is not responsible for misprints or errors on product prices or information. For more information, please see our Terms and Conditions.

Warning: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Please visit www.P65Warnings.ca.gov for more information. This item was manufactured prior to August 31, 2018.

Copyright © 2024 Solarbotics Ltd. All Rights Reserved
cart