Cart 
Calgary DIY Electronic Products and Kits
New ProductsTop SellersFeatured
-
Eclipse 900-258 IC Extraction Tool
Pull that IC out of it's holder with a firm grip and no bent pins!$1.95 USDIn stock
Add to cart -
Matter3D Blue Performance PLA 1.75mm Filament – 1kg Spoo...
Matter3D's performance PLA 1.75mm filament comes in 1kg spools and is high impact, high temperature, and FDA approved (food and beverage use) material.$24.95 USDIn stock
Add to cart -
Matter3D Black Performance PLA 2.85mm Filament – 1kg Spo...
Matter3D's performance PLA 1.75mm filament comes in 1kg spools and is high impact, high temperature, and FDA approved (food and beverage use) material.$24.95 USDIn stock
Add to cart -
Matter3D White Performance PLA 2.85mm Filament – 1kg Spo...
Matter3D's performance PLA 1.75mm filament comes in 1kg spools and is high impact, high temperature, and FDA approved (food and beverage use) material.$24.95 USDIn stock
Add to cart -
Matter3D White Performance PLA 1.75mm Filament – 1kg Spo...
Matter3D's performance PLA 1.75mm filament comes in 1kg spools and is high impact, high temperature, and FDA approved (food and beverage use) material.$24.95 USDIn stock
Add to cart -
Creality Ender-3 S1 3D Printer
Creality; upping their game in the Ender-3 series with direct-extruder goodness. And other things.$419.95 USDIn stock
Add to cart -
136x110mm 6V/333mA Polycrystalline Solar Cell
This addition to the Solarbotics line of solar cells is this large 136x110mm unit, featuring 6V/330mA nominal output.$10.39 USDIn stock
Add to cart -
220x340mm 6V/1.67A Polycrystalline Solar Cell
This addition to the Solarbotics line of solar cells is this larger 220x340mm unit, featuring 6V/1.67AA nominal output.$26.89 USDIn stock
Add to cart -
165x165mm 9V/467mA Polycrystalline Solar Cell
This addition to the Solarbotics line of solar cells is this large 165x165mm unit, featuring 9V/467mA nominal output.$18.79 USDIn stock
Add to cart -
130x110mm 12V/160mA Polycrystalline Solar Cell
This addition to the Solarbotics line of solar cells is this 130x110mm unit, featuring 12V/160mA nominal output.$11.19 USDIn stock
Add to cart -
220x170mm 9V/467mA Polycrystalline Solar Cell
This addition to the Solarbotics line of solar cells is this large 220x170mm unit, featuring 9V/467mA nominal output.$19.19 USDIn stock
Add to cart -
165x165mm 6V/1.67A Monocrystalline Solar Cell
This addition to the Solarbotics line of solar cells is this large 165x165mm unit, featuring 6V/1.67A nominal output.$19.19 USDIn stock
Add to cart -
90x60mm 6V/100mA Polycrystalline Solar Cell
This addition to the Solarbotics line of solar cells is this 90x60mm unit, featuring 6V/100mA nominal output.$7.29 USDIn stock
Add to cart -
18650 Lithium-Ion 3.7V 2600mAh Rechargeable Battery
These are very slim, extremely light weight batteries based on the new Polymer Lithium Ion chemistry.In stock
Read more -
Lithium Polymer (LiPo) Cell – 5000mAh/3.7V
These are slim, light-weight batteries based on Polymer Lithium Ion chemistry with JST power connections$25.62 USDIn stock
Add to cart
-
Gear Motor 9 – 143:1 90 Degree Shaft
This 143:1 gear motor is much like the GM3 gear motor but runs at nearly twice the speed. Great for robots needing speed over torque!$4.77 USD - $5.75 USDIn stock
Add to cart -
GM2/3/8/9/17 Gear Motor mounts
Auxiliary mounts for the GM2/3/8/9/17 gear motors. Image shows each side of wheel (not sold in sets of 2)$1.25 USDIn stock
Add to cart -
3mm LED with internal resistor – 5V
A red 5 volt LED where the resistor is built right into the plastic. No more messy current limiting resistors!$0.35 USDIn stock
Select options -
Gear Motor 24 – 1:192 90 Degree Shaft
Call it a teeny, tiny little brother to the GM3 gearbox. With a suitably smaller appetite for power!$4.49 USD - $4.99 USDIn stock
Add to cart -
ATmega328P-20PU Microcontroller
This unit is a higher-capacity version of the ATmega168 - more than TWICE the flash memory for sketches (30K available instead of 14K), TWICE the RAM (2K instead of 1K), TWICE the EEPROM (1K instead of 512b)$8.95 USDIn stock
Add to cart -
Push Pogo Pin 4 – Cup Tip
This 33mm (1.3") long cup-tipped pogo pin probe pin is normally used for electronic JTAG uses, but we use them for bots!$1.25 USDIn stock
Add to cart -
Regular Motor 2
Need more power out of your gear motor? This is a high-power motor that fits in the same form factor as used by the GM2/3/8/9 style gear motors.$2.25 USDIn stock
Add to cart -
GM2/3/8/9/17 with GMPW
Need a gear motor and wheel? Get this convenient package, and save! Complete with a GM2/3/8/9/17 gear motor, a wheel with a molded-on tire, and mounting screw.$6.78 USD - $7.98 USDIn stock
Select options -
Regular Motor 3 – 6V
This is the standard motor that is built into the GM2/3/8/9. Nominally runs at 6VDC and consumes roughly 35mA$2.00 USDIn stock
Add to cart -
150 ohm Resistor
5% accuracy 1/4 watt resistors to get you started with your BEAM experiments.$0.20 USDIn stock
Add to cart -
RF500TB-14415 DC Motor
The RF500TB is a very efficient, powerful, slow pancake motor.$4.95 USDIn stock
Add to cart -
Regular Pager Motor 2
These new, factory-fresh pager motors come ready-to-run: no eccentric weight removal necessary like on surplus pager motors!$5.19 USDIn stock
Add to cart -
Gear Motor 17 – 228:1 HE Offset Shaft
A High-Efficiency (HE) 3V DC motor coupled to a 228:1 gearbox give you a very useful low-power gearmotor!$5.75 USDIn stock
Add to cart -
Vibrating Disk Motor
The VPM2 is a replacement for the now unavailable venerable VPM. At 12mm dia x 3.4mm thick, it's smaller than the original, and has presoldered leads!$3.95 USDIn stock
Add to cart -
OpenBeam Extrusion 60mm Length
This is the 'beam' part of 'Open Beam', the central building component for the system.$1.25 USDOut of stock
Select options
-
Creality Ender-3 S1 3D Printer
Creality; upping their game in the Ender-3 series with direct-extruder goodness. And other things.$419.95 USDIn stock
Add to cart -
Raspberry Pi Zero W
A tiny, single board computer with wireless and Bluetooth connectivity, perfect for embedded Internet of Things projects.Out of stock
Read more -
Creality CR-30 3DPrintMill 3D Printer
Print into infinity with this conveyor belt equipped 3DPrintMill$1,089.99 USDIn stock
Add to cart -
Creality CR-6 Max 3D Printer
This printer has a massive print volume and excellent build quality. Assembly is quick and simple!$859.99 USDIn stock
Add to cart -
Creality Ender 6 3D Printer
This printer comes inside an enclosure! How neat is that?!$545.95 USDIn stock
Add to cart -
Creality LD-006 Resin 3D Printer
Get into resin printing with this excellent printer from Creality! High resolution, large build size, fully assembled, and well built.$739.99 USDIn stock
Add to cart -
Raspberry Pi Pico
The Raspberry Pi Pico. Fast, tiny, and programmed with either C++ or MicroPython$6.10 USDIn stock
Add to cart -
Creality Ender 3 V2
Start your 3D printing journey with this affordable and easy to use 3D printer with a respectable 220x220x250mm print volume.$297.99 USDIn stock
Add to cart -
Raspberry Pi 4B- 8GB
The Raspberry Pi 4B. A bit faster than the Pi 3 B+, with some well-overdue enhancements!$99.99 USDOut of stock
Read more -
Creality Ender 5 Plus 3D Printer
Print with reliability and stability with this easy to assemble 3D printer.$599.99 USDIn stock
Add to cart -
Creality CR-6 SE 3D Printer
Higher quality than the Ender 3 V2, this printer has some great improvements and quality of life additions.$395.85 USDIn stock
Add to cart -
eTwinkling 1.75mm PLA Warm Orange Filament – 1kg Spool
eSun’s eTwinkling PLA filament is a nice way to add some extra flair to your 3D printing projects!$25.95 USDIn stock
Add to cart -
eSilk 1.75mm PLA Rainbow Filament – 1kg Spool
eSuns eSilk is a modified verison of their standard PLA with materials that give it a bright and shiny effect.$39.95 USDAvailable on backorder
Add to cart -
Pimoroni Raspberry Pi Zero OctoCam
Raspberry Pi Zero W does make a great security$53.79 USDoctopuscamera!In stock
Add to cart -
Raspberry Pi 4B – 4GB
The Raspberry Pi 4B. A bit faster than the Pi 3 B+, with some well-overdue enhancements!$84.19 USDOut of stock
Read more